FLUSH JOINT ALUMINIUM DOWNPIPE BENDS - 72x72mm72x72mm Flush Joint aluminium downpipe bends. Manufactured from marine grade aluminium and powder coated for ultimate durability. Used for changing direction within a rainwater downpipe drop. 92. 5 degree bend angle option. 112. 5 degree bend angle option. If connecting into a branch use same angle branch. Please note: If connecting to a gutter outlet an adjustable swanneck would be more suitable than utilising two bends. The adjustable swannecks are

Gable box ends are used at the ends of fascia board runs where the fascia meets the pitched fascia section (barge Boards)

Each pipe fitting is supplied with a cast socket bonded to the top

Suited to flat or slightly sloped installations with packing shims

10 x 24mm Flange Head Screws - Austenitic stainless steel

72x72mm Flush Joint aluminium downpipe bends

Typically fixed to marine grade plywood or fibre cement backing boards

76mm / 3" diameter pipe

Polyester powder coated using architectural grade external powders

a traditional non eared downpipe socket would be required

Our 125mm half round gutter top rafter bracket is ideal for exposed rafter feet

it ensures longevity without maintenance demands

Branches would require a pipe clip support to each joint