Liquid crystal display devices - Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)1 Scope This part of IEC 6174740 is a mechanical performance testing procedure for cover glass used in electronic flat panel displays in mobile devices. This standard is focused on the measurement of as received edge strength via uni axial flexure generated by a four point bend.

the reference material producer is competent to manufacture CRM’s

and consistency in

The method is intended for copper alloys with a mass fraction of zinc more than 15 %

for instance:

Who is BS EN 61987-24-1 - Positioners and I/P converters for electronic data exchange for

BS EN 10250-2

designation of copper-clad laminate

NOTE The open-loop manoeuvres specified in this International Standard are not representative of normal driving conditions

the elements running on the devices and the data flows

graded and multilayer coatings can also be measured in cross-section if the thickness of the individual layers or gradations is greater than the spatial resolution of the indentation process

or they enhance the material properties by addition of virgin components or additives

holding and storing mooring ropes on a single drum