Warrior Olive Grate FrameThe grate frame in the Warrior Olive is the outer cast iron carrier that forms the base structure of the firebox, holding the inner riddling grate in position and supporting the fuel bed. It takes sustained heat loads and can warp or crack after years of regular use, particularly on multi fuel operation. Replacing it with this cast iron grate frame restores the original firebox geometry. Compatible with: Warrior Olive stove (boiler and non boiler

Replace it when the frame is bent

which affects burn efficiency and can allow sparks or smoke to escape

Intact side bricks keep firebox temperatures high by preventing heat from escaping laterally through the stove walls

The door catch is the latching mechanism that holds the Olymberyl Gabriel door closed during operation

Replace it when the pan has corroded

so a damaged one should be replaced promptly to avoid further wear on surrounding parts

These cast iron bars sit at the front of the firebox and prevent burning logs from rolling forward against the door glass

The door hinges on the Warrior Olive stove support the door through thousands of open and close cycles under heat

This complete fire brick set covers all lining positions in the Olymberyl Baby Gabriel firebox

The stove must be fully cooled and emptied before the grate frame can be removed

catching ash and embers at the front of the firebox

which shortens the life of the stove and reduces heat retention